# Makefile.in generated by automake 1.11.6 from Makefile.am.
# qucs/components/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# 
# qucs/components/Makefile.am
#
# Automake input file.
#
# Copyright (C) 2004-2011 Stefan Jahn <stefan@lkcc.org>
# New models 2013 addded Mike Brinson  mbrin72043@yahoo.co.uk
#
# This is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# 
# This software is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this package; see the file COPYING.  If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor,
# Boston, MA 02110-1301, USA.  
#



am__make_dryrun = \
  { \
    am__dry=no; \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
      *) \
        for am__flg in $$MAKEFLAGS; do \
          case $$am__flg in \
            *=*|--*) ;; \
            *n*) am__dry=yes; break;; \
          esac; \
        done;; \
    esac; \
    test $$am__dry = yes; \
  }
pkgdatadir = $(datadir)/qucs
pkgincludedir = $(includedir)/qucs
pkglibdir = $(libdir)/qucs
pkglibexecdir = $(libexecdir)/qucs
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
subdir = qucs/components
DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in ChangeLog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
libcomponents_a_AR = $(AR) $(ARFLAGS)
libcomponents_a_LIBADD =
am_libcomponents_a_OBJECTS = phaseshifter.$(OBJEXT) gyrator.$(OBJEXT) \
	componentdialog.$(OBJEXT) vcvs.$(OBJEXT) vccs.$(OBJEXT) \
	tr_sim.$(OBJEXT) tline.$(OBJEXT) substrate.$(OBJEXT) \
	sp_sim.$(OBJEXT) param_sweep.$(OBJEXT) mstee.$(OBJEXT) \
	msstep.$(OBJEXT) msline.$(OBJEXT) mscross.$(OBJEXT) \
	mscoupled.$(OBJEXT) mslange.$(OBJEXT) mscorner.$(OBJEXT) \
	hb_sim.$(OBJEXT) diode.$(OBJEXT) dc_sim.$(OBJEXT) \
	coplanar.$(OBJEXT) ccvs.$(OBJEXT) cccs.$(OBJEXT) \
	ac_sim.$(OBJEXT) volt_dc.$(OBJEXT) volt_ac.$(OBJEXT) \
	subcircuit.$(OBJEXT) sparamfile.$(OBJEXT) source_ac.$(OBJEXT) \
	isolator.$(OBJEXT) equation.$(OBJEXT) circulator.$(OBJEXT) \
	attenuator.$(OBJEXT) ampere_dc.$(OBJEXT) transformer.$(OBJEXT) \
	symtrafo.$(OBJEXT) subcirport.$(OBJEXT) ground.$(OBJEXT) \
	dcfeed.$(OBJEXT) dcblock.$(OBJEXT) biast.$(OBJEXT) \
	inductor.$(OBJEXT) capacitor.$(OBJEXT) vhdlfile.$(OBJEXT) \
	component.$(OBJEXT) resistor.$(OBJEXT) iprobe.$(OBJEXT) \
	volt_noise.$(OBJEXT) ampere_noise.$(OBJEXT) msmbend.$(OBJEXT) \
	msopen.$(OBJEXT) ampere_ac.$(OBJEXT) bjt.$(OBJEXT) \
	jfet.$(OBJEXT) mosfet.$(OBJEXT) msgap.$(OBJEXT) \
	bjtsub.$(OBJEXT) mosfet_sub.$(OBJEXT) vpulse.$(OBJEXT) \
	ipulse.$(OBJEXT) vrect.$(OBJEXT) irect.$(OBJEXT) \
	msvia.$(OBJEXT) amplifier.$(OBJEXT) opamp.$(OBJEXT) \
	spicefile.$(OBJEXT) cpwopen.$(OBJEXT) cpwshort.$(OBJEXT) \
	spicedialog.$(OBJEXT) cpwgap.$(OBJEXT) cpwstep.$(OBJEXT) \
	libcomp.$(OBJEXT) mutual.$(OBJEXT) mutual2.$(OBJEXT) \
	noise_ii.$(OBJEXT) noise_iv.$(OBJEXT) noise_vv.$(OBJEXT) \
	logical_or.$(OBJEXT) logical_nor.$(OBJEXT) \
	logical_and.$(OBJEXT) logical_nand.$(OBJEXT) \
	logical_xor.$(OBJEXT) logical_xnor.$(OBJEXT) \
	logical_inv.$(OBJEXT) digi_sim.$(OBJEXT) digi_source.$(OBJEXT) \
	coupler.$(OBJEXT) rs_flipflop.$(OBJEXT) d_flipflop.$(OBJEXT) \
	jk_flipflop.$(OBJEXT) coaxialline.$(OBJEXT) vprobe.$(OBJEXT) \
	switch.$(OBJEXT) relais.$(OBJEXT) am_modulator.$(OBJEXT) \
	pm_modulator.$(OBJEXT) opt_sim.$(OBJEXT) \
	optimizedialog.$(OBJEXT) tline_4port.$(OBJEXT) \
	twistedpair.$(OBJEXT) bondwire.$(OBJEXT) rlcg.$(OBJEXT) \
	hicumL2V2p1.$(OBJEXT) HBT_X.$(OBJEXT) verilogfile.$(OBJEXT) \
	vexp.$(OBJEXT) iexp.$(OBJEXT) eqndefined.$(OBJEXT) \
	vfile.$(OBJEXT) ifile.$(OBJEXT) mod_amp.$(OBJEXT) \
	hic2_full.$(OBJEXT) thyristor.$(OBJEXT) triac.$(OBJEXT) \
	diac.$(OBJEXT) log_amp.$(OBJEXT) hic0_full.$(OBJEXT) \
	potentiometer.$(OBJEXT) rfedd.$(OBJEXT) rfedd2p.$(OBJEXT) \
	MESFET.$(OBJEXT) rectline.$(OBJEXT) hicumL0V1p2.$(OBJEXT) \
	hicumL2V2p23.$(OBJEXT) photodiode.$(OBJEXT) EKV26MOS.$(OBJEXT) \
	logical_buf.$(OBJEXT) dff_SR.$(OBJEXT) jkff_SR.$(OBJEXT) \
	tff_SR.$(OBJEXT) gatedDlatch.$(OBJEXT) logic_0.$(OBJEXT) \
	logic_1.$(OBJEXT) mux2to1.$(OBJEXT) mux4to1.$(OBJEXT) \
	mux8to1.$(OBJEXT) DLS_nto1.$(OBJEXT) DLS_1ton.$(OBJEXT) \
	andor4x2.$(OBJEXT) andor4x3.$(OBJEXT) andor4x4.$(OBJEXT) \
	dmux2to4.$(OBJEXT) dmux3to8.$(OBJEXT) dmux4to16.$(OBJEXT) \
	ha1b.$(OBJEXT) fa1b.$(OBJEXT) fa2b.$(OBJEXT) pad2bit.$(OBJEXT) \
	pad3bit.$(OBJEXT) pad4bit.$(OBJEXT) binarytogrey4bit.$(OBJEXT) \
	vafile.$(OBJEXT) greytobinary4bit.$(OBJEXT) \
	comp_1bit.$(OBJEXT) comp_2bit.$(OBJEXT) comp_4bit.$(OBJEXT) \
	hpribin4bit.$(OBJEXT) msrstub.$(OBJEXT) \
	phototransistor.$(OBJEXT) nigbt.$(OBJEXT) \
	hicumL2V2p24.$(OBJEXT) hicumL0V1p2g.$(OBJEXT) hybrid.$(OBJEXT) \
	ctline.$(OBJEXT) tunneldiode.$(OBJEXT) hicumL0V1p3.$(OBJEXT) \
	hicumL2V2p31n.$(OBJEXT) bsim3v34nMOS.$(OBJEXT) \
	bsim3v34pMOS.$(OBJEXT) bsim4v30nMOS.$(OBJEXT) \
	bsim4v30pMOS.$(OBJEXT)
am__objects_1 = componentdialog.moc.$(OBJEXT) \
	spicedialog.moc.$(OBJEXT) optimizedialog.moc.$(OBJEXT) \
	spicefile.moc.$(OBJEXT)
am__objects_2 = $(am__objects_1)
nodist_libcomponents_a_OBJECTS = $(am__objects_2)
libcomponents_a_OBJECTS = $(am_libcomponents_a_OBJECTS) \
	$(nodist_libcomponents_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
	-o $@
SOURCES = $(libcomponents_a_SOURCES) $(nodist_libcomponents_a_SOURCES)
DIST_SOURCES = $(libcomponents_a_SOURCES)
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
HEADERS = $(noinst_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/frans/qucs-git/release/qucs-0.0.17/missing --run aclocal-1.11
AMTAR = $${TAR-tar}
AR = ar
AUTOCONF = ${SHELL} /home/frans/qucs-git/release/qucs-0.0.17/missing --run autoconf
AUTOHEADER = ${SHELL} /home/frans/qucs-git/release/qucs-0.0.17/missing --run autoheader
AUTOMAKE = ${SHELL} /home/frans/qucs-git/release/qucs-0.0.17/missing --run automake-1.11
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -pipe -W -Wall -Wmissing-prototypes
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = 
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2 -pipe -fno-exceptions -fno-check-new -W -Wall
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = 
EXEEXT = 
GREP = 
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS = 
LIBOBJS = 
LIBS = 
LRELEASE = /usr/bin/lrelease-qt4
LTLIBOBJS = 
LUPDATE = /usr/bin/lupdate-qt4
MAINT = 
MAKEINFO = ${SHELL} /home/frans/qucs-git/release/qucs-0.0.17/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MOC = /usr/bin/moc-qt4
OBJEXT = o
PACKAGE = qucs
PACKAGE_BUGREPORT = qucs-bugs@lists.sourceforge.net
PACKAGE_NAME = qucs
PACKAGE_STRING = qucs 0.0.17
PACKAGE_TARNAME = qucs
PACKAGE_URL = 
PACKAGE_VERSION = 0.0.17
PATHXFORM = echo
PATH_SEPARATOR = :
PKG_CONFIG = 
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
QT_CFLAGS = 
QT_INCLUDES = -I/usr/include/qt4 -I/usr/include/qt4/Qt -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore -I/usr/include/qt4/Qt3Support -DQT_DEBUG -DQT3_SUPPORT -DQT_THREAD_SUPPORT -D_REENTRANT
QT_LDFLAGS = -Lnonexistent/lib 
QT_LIBS = -lQtCore -lQtGui -lQtXml -lQt3Support
RANLIB = ranlib
RELEASEDIRS = qucs-core qucs-doc asco examples
SET_MAKE = 
SHELL = /bin/bash
STRIP = 
UIC = /usr/bin/uic-qt4
VERSION = 0.0.17
X11_INCLUDES = 
X11_LDFLAGS = 
X11_LIBS =   -lX11 
XMKMF = 
X_CFLAGS = 
X_EXTRA_LIBS = 
X_LIBS = 
X_PRE_LIBS = 
abs_builddir = /home/frans/qucs-git/release/qucs-0.0.17/qucs/components
abs_srcdir = /home/frans/qucs-git/release/qucs-0.0.17/qucs/components
abs_top_builddir = /home/frans/qucs-git/release/qucs-0.0.17
abs_top_srcdir = /home/frans/qucs-git/release/qucs-0.0.17
ac_ct_CC = gcc
ac_ct_CXX = g++
am__include = include
am__leading_dot = .
am__quote = 
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/frans/qucs-git/release/qucs-0.0.17/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
subdirs =  qucs-core qucs-doc asco examples
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
noinst_LIBRARIES = libcomponents.a
MOCHEADERS = componentdialog.h spicedialog.h optimizedialog.h spicefile.h
MOCFILES = $(MOCHEADERS:.h=.moc.cpp)
libcomponents_a_SOURCES = phaseshifter.cpp gyrator.cpp componentdialog.cpp    \
  vcvs.cpp vccs.cpp tr_sim.cpp tline.cpp substrate.cpp sp_sim.cpp             \
  param_sweep.cpp mstee.cpp msstep.cpp msline.cpp mscross.cpp mscoupled.cpp mslange.cpp   \
  mscorner.cpp hb_sim.cpp diode.cpp dc_sim.cpp coplanar.cpp ccvs.cpp cccs.cpp \
  ac_sim.cpp volt_dc.cpp volt_ac.cpp subcircuit.cpp sparamfile.cpp            \
  source_ac.cpp isolator.cpp equation.cpp circulator.cpp attenuator.cpp       \
  ampere_dc.cpp transformer.cpp symtrafo.cpp subcirport.cpp ground.cpp        \
  dcfeed.cpp dcblock.cpp biast.cpp inductor.cpp capacitor.cpp vhdlfile.cpp    \
  component.cpp resistor.cpp iprobe.cpp volt_noise.cpp ampere_noise.cpp       \
  msmbend.cpp msopen.cpp ampere_ac.cpp bjt.cpp jfet.cpp mosfet.cpp            \
  msgap.cpp bjtsub.cpp mosfet_sub.cpp vpulse.cpp ipulse.cpp vrect.cpp         \
  irect.cpp msvia.cpp amplifier.cpp opamp.cpp spicefile.cpp cpwopen.cpp       \
  cpwshort.cpp spicedialog.cpp cpwgap.cpp cpwstep.cpp libcomp.cpp mutual.cpp  \
  mutual2.cpp noise_ii.cpp noise_iv.cpp noise_vv.cpp logical_or.cpp           \
  logical_nor.cpp logical_and.cpp logical_nand.cpp logical_xor.cpp            \
  logical_xnor.cpp logical_inv.cpp digi_sim.cpp digi_source.cpp coupler.cpp   \
  rs_flipflop.cpp d_flipflop.cpp jk_flipflop.cpp coaxialline.cpp vprobe.cpp   \
  switch.cpp relais.cpp am_modulator.cpp pm_modulator.cpp opt_sim.cpp         \
  optimizedialog.cpp tline_4port.cpp twistedpair.cpp bondwire.cpp rlcg.cpp    \
  hicumL2V2p1.cpp HBT_X.cpp verilogfile.cpp vexp.cpp iexp.cpp eqndefined.cpp  \
  vfile.cpp ifile.cpp mod_amp.cpp hic2_full.cpp thyristor.cpp triac.cpp       \
  diac.cpp log_amp.cpp hic0_full.cpp potentiometer.cpp rfedd.cpp rfedd2p.cpp  \
  MESFET.cpp rectline.cpp hicumL0V1p2.cpp hicumL2V2p23.cpp photodiode.cpp     \
  EKV26MOS.cpp logical_buf.cpp dff_SR.cpp jkff_SR.cpp tff_SR.cpp              \
  gatedDlatch.cpp logic_0.cpp logic_1.cpp mux2to1.cpp mux4to1.cpp mux8to1.cpp \
  DLS_nto1.cpp DLS_1ton.cpp andor4x2.cpp andor4x3.cpp andor4x4.cpp            \
  dmux2to4.cpp dmux3to8.cpp dmux4to16.cpp ha1b.cpp fa1b.cpp fa2b.cpp          \
  pad2bit.cpp pad3bit.cpp pad4bit.cpp binarytogrey4bit.cpp vafile.cpp         \
  greytobinary4bit.cpp comp_1bit.cpp comp_2bit.cpp comp_4bit.cpp              \
  hpribin4bit.cpp msrstub.cpp phototransistor.cpp nigbt.cpp hicumL2V2p24.cpp  \
  hicumL0V1p2g.cpp hybrid.cpp ctline.cpp tunneldiode.cpp hicumL0V1p3.cpp      \
  hicumL2V2p31n.cpp  bsim3v34nMOS.cpp bsim3v34pMOS.cpp bsim4v30nMOS.cpp       \
  bsim4v30pMOS.cpp

nodist_libcomponents_a_SOURCES = $(MOCFILES)
noinst_HEADERS = $(MOCHEADERS) resistor.h components.h capacitor.h vccs.h     \
  inductor.h biast.h dcblock.h dcfeed.h ground.h subcirport.h symtrafo.h      \
  transformer.h ampere_dc.h attenuator.h circulator.h equation.h isolator.h   \
  source_ac.h sparamfile.h subcircuit.h volt_ac.h volt_dc.h ac_sim.h cccs.h   \
  ccvs.h coplanar.h dc_sim.h diode.h hb_sim.h mscorner.h mscoupled.h mslange.h          \
  mscross.h msline.h msstep.h mstee.h param_sweep.h sp_sim.h substrate.h      \
  tline.h tr_sim.h component.h vcvs.h gyrator.h phaseshifter.h vhdlfile.h     \
  iprobe.h volt_noise.h ampere_noise.h msmbend.h msopen.h ampere_ac.h bjt.h   \
  jfet.h mosfet.h msgap.h bjtsub.h mosfet_sub.h vpulse.h ipulse.h vrect.h     \
  irect.h msvia.h amplifier.h opamp.h spicefile.h cpwopen.h cpwshort.h        \
  cpwgap.h cpwstep.h libcomp.h mutual.h mutual2.h noise_ii.h noise_iv.h       \
  noise_vv.h logical_or.h logical_nor.h logical_and.h logical_nand.h          \
  logical_xor.h logical_xnor.h logical_inv.h digi_sim.h digi_source.h         \
  coupler.h rs_flipflop.h d_flipflop.h jk_flipflop.h coaxialline.h vprobe.h   \
  switch.h relais.h am_modulator.h pm_modulator.h opt_sim.h tline_4port.h     \
  twistedpair.h bondwire.h hicumL2V2p1.h HBT_X.h verilogfile.h vexp.h iexp.h  \
  eqndefined.h vfile.h ifile.h mod_amp.h hic2_full.h thyristor.h triac.h      \
  diac.h log_amp.h hic0_full.h potentiometer.h rfedd.h rfedd2p.h MESFET.h     \
  rectline.h hicumL0V1p2.h hicumL2V2p23.h photodiode.h EKV26MOS.h rlcg.h      \
  logical_buf.h dff_SR.h jkff_SR.h tff_SR.h gatedDlatch.h logic_0.h logic_1.h \
  mux2to1.h mux4to1.h mux8to1.h DLS_nto1.h DLS_1ton.h andor4x2.h andor4x3.h   \
  andor4x4.h dmux2to4.h dmux3to8.h dmux4to16.h ha1b.h fa1b.h fa2b.h pad2bit.h \
  pad3bit.h pad4bit.h binarytogrey4bit.h greytobinary4bit.h comp_1bit.h       \
  comp_2bit.h comp_4bit.h hpribin4bit.h msrstub.h phototransistor.h nigbt.h   \
  vafile.h hicumL2V2p24.h hicumL0V1p2g.h hybrid.h ctline.h tunneldiode.h      \
  hicumL0V1p3.h hicumL2V2p31n.h  bsim3v34nMOS.h bsim3v34pMOS.h bsim4v30nMOS.h \
  bsim4v30pMOS.h

AM_CPPFLAGS = $(X11_INCLUDES) $(QT_INCLUDES) -I$(top_srcdir)/qucs
SUFFIXES = .moc.cpp
CLEANFILES = *~
MAINTAINERCLEANFILES = Makefile.in *.moc.cpp
DISTCLEANFILES = *.moc.cpp
all: all-am

.SUFFIXES:
.SUFFIXES: .moc.cpp .cpp .h .o .obj
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu qucs/components/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu qucs/components/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

clean-noinstLIBRARIES:
	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libcomponents.a: $(libcomponents_a_OBJECTS) $(libcomponents_a_DEPENDENCIES) $(EXTRA_libcomponents_a_DEPENDENCIES) 
	-rm -f libcomponents.a
	$(libcomponents_a_AR) libcomponents.a $(libcomponents_a_OBJECTS) $(libcomponents_a_LIBADD)
	$(RANLIB) libcomponents.a

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/DLS_1ton.Po
include ./$(DEPDIR)/DLS_nto1.Po
include ./$(DEPDIR)/EKV26MOS.Po
include ./$(DEPDIR)/HBT_X.Po
include ./$(DEPDIR)/MESFET.Po
include ./$(DEPDIR)/ac_sim.Po
include ./$(DEPDIR)/am_modulator.Po
include ./$(DEPDIR)/ampere_ac.Po
include ./$(DEPDIR)/ampere_dc.Po
include ./$(DEPDIR)/ampere_noise.Po
include ./$(DEPDIR)/amplifier.Po
include ./$(DEPDIR)/andor4x2.Po
include ./$(DEPDIR)/andor4x3.Po
include ./$(DEPDIR)/andor4x4.Po
include ./$(DEPDIR)/attenuator.Po
include ./$(DEPDIR)/biast.Po
include ./$(DEPDIR)/binarytogrey4bit.Po
include ./$(DEPDIR)/bjt.Po
include ./$(DEPDIR)/bjtsub.Po
include ./$(DEPDIR)/bondwire.Po
include ./$(DEPDIR)/bsim3v34nMOS.Po
include ./$(DEPDIR)/bsim3v34pMOS.Po
include ./$(DEPDIR)/bsim4v30nMOS.Po
include ./$(DEPDIR)/bsim4v30pMOS.Po
include ./$(DEPDIR)/capacitor.Po
include ./$(DEPDIR)/cccs.Po
include ./$(DEPDIR)/ccvs.Po
include ./$(DEPDIR)/circulator.Po
include ./$(DEPDIR)/coaxialline.Po
include ./$(DEPDIR)/comp_1bit.Po
include ./$(DEPDIR)/comp_2bit.Po
include ./$(DEPDIR)/comp_4bit.Po
include ./$(DEPDIR)/component.Po
include ./$(DEPDIR)/componentdialog.Po
include ./$(DEPDIR)/componentdialog.moc.Po
include ./$(DEPDIR)/coplanar.Po
include ./$(DEPDIR)/coupler.Po
include ./$(DEPDIR)/cpwgap.Po
include ./$(DEPDIR)/cpwopen.Po
include ./$(DEPDIR)/cpwshort.Po
include ./$(DEPDIR)/cpwstep.Po
include ./$(DEPDIR)/ctline.Po
include ./$(DEPDIR)/d_flipflop.Po
include ./$(DEPDIR)/dc_sim.Po
include ./$(DEPDIR)/dcblock.Po
include ./$(DEPDIR)/dcfeed.Po
include ./$(DEPDIR)/dff_SR.Po
include ./$(DEPDIR)/diac.Po
include ./$(DEPDIR)/digi_sim.Po
include ./$(DEPDIR)/digi_source.Po
include ./$(DEPDIR)/diode.Po
include ./$(DEPDIR)/dmux2to4.Po
include ./$(DEPDIR)/dmux3to8.Po
include ./$(DEPDIR)/dmux4to16.Po
include ./$(DEPDIR)/eqndefined.Po
include ./$(DEPDIR)/equation.Po
include ./$(DEPDIR)/fa1b.Po
include ./$(DEPDIR)/fa2b.Po
include ./$(DEPDIR)/gatedDlatch.Po
include ./$(DEPDIR)/greytobinary4bit.Po
include ./$(DEPDIR)/ground.Po
include ./$(DEPDIR)/gyrator.Po
include ./$(DEPDIR)/ha1b.Po
include ./$(DEPDIR)/hb_sim.Po
include ./$(DEPDIR)/hic0_full.Po
include ./$(DEPDIR)/hic2_full.Po
include ./$(DEPDIR)/hicumL0V1p2.Po
include ./$(DEPDIR)/hicumL0V1p2g.Po
include ./$(DEPDIR)/hicumL0V1p3.Po
include ./$(DEPDIR)/hicumL2V2p1.Po
include ./$(DEPDIR)/hicumL2V2p23.Po
include ./$(DEPDIR)/hicumL2V2p24.Po
include ./$(DEPDIR)/hicumL2V2p31n.Po
include ./$(DEPDIR)/hpribin4bit.Po
include ./$(DEPDIR)/hybrid.Po
include ./$(DEPDIR)/iexp.Po
include ./$(DEPDIR)/ifile.Po
include ./$(DEPDIR)/inductor.Po
include ./$(DEPDIR)/iprobe.Po
include ./$(DEPDIR)/ipulse.Po
include ./$(DEPDIR)/irect.Po
include ./$(DEPDIR)/isolator.Po
include ./$(DEPDIR)/jfet.Po
include ./$(DEPDIR)/jk_flipflop.Po
include ./$(DEPDIR)/jkff_SR.Po
include ./$(DEPDIR)/libcomp.Po
include ./$(DEPDIR)/log_amp.Po
include ./$(DEPDIR)/logic_0.Po
include ./$(DEPDIR)/logic_1.Po
include ./$(DEPDIR)/logical_and.Po
include ./$(DEPDIR)/logical_buf.Po
include ./$(DEPDIR)/logical_inv.Po
include ./$(DEPDIR)/logical_nand.Po
include ./$(DEPDIR)/logical_nor.Po
include ./$(DEPDIR)/logical_or.Po
include ./$(DEPDIR)/logical_xnor.Po
include ./$(DEPDIR)/logical_xor.Po
include ./$(DEPDIR)/mod_amp.Po
include ./$(DEPDIR)/mosfet.Po
include ./$(DEPDIR)/mosfet_sub.Po
include ./$(DEPDIR)/mscorner.Po
include ./$(DEPDIR)/mscoupled.Po
include ./$(DEPDIR)/mscross.Po
include ./$(DEPDIR)/msgap.Po
include ./$(DEPDIR)/mslange.Po
include ./$(DEPDIR)/msline.Po
include ./$(DEPDIR)/msmbend.Po
include ./$(DEPDIR)/msopen.Po
include ./$(DEPDIR)/msrstub.Po
include ./$(DEPDIR)/msstep.Po
include ./$(DEPDIR)/mstee.Po
include ./$(DEPDIR)/msvia.Po
include ./$(DEPDIR)/mutual.Po
include ./$(DEPDIR)/mutual2.Po
include ./$(DEPDIR)/mux2to1.Po
include ./$(DEPDIR)/mux4to1.Po
include ./$(DEPDIR)/mux8to1.Po
include ./$(DEPDIR)/nigbt.Po
include ./$(DEPDIR)/noise_ii.Po
include ./$(DEPDIR)/noise_iv.Po
include ./$(DEPDIR)/noise_vv.Po
include ./$(DEPDIR)/opamp.Po
include ./$(DEPDIR)/opt_sim.Po
include ./$(DEPDIR)/optimizedialog.Po
include ./$(DEPDIR)/optimizedialog.moc.Po
include ./$(DEPDIR)/pad2bit.Po
include ./$(DEPDIR)/pad3bit.Po
include ./$(DEPDIR)/pad4bit.Po
include ./$(DEPDIR)/param_sweep.Po
include ./$(DEPDIR)/phaseshifter.Po
include ./$(DEPDIR)/photodiode.Po
include ./$(DEPDIR)/phototransistor.Po
include ./$(DEPDIR)/pm_modulator.Po
include ./$(DEPDIR)/potentiometer.Po
include ./$(DEPDIR)/rectline.Po
include ./$(DEPDIR)/relais.Po
include ./$(DEPDIR)/resistor.Po
include ./$(DEPDIR)/rfedd.Po
include ./$(DEPDIR)/rfedd2p.Po
include ./$(DEPDIR)/rlcg.Po
include ./$(DEPDIR)/rs_flipflop.Po
include ./$(DEPDIR)/source_ac.Po
include ./$(DEPDIR)/sp_sim.Po
include ./$(DEPDIR)/sparamfile.Po
include ./$(DEPDIR)/spicedialog.Po
include ./$(DEPDIR)/spicedialog.moc.Po
include ./$(DEPDIR)/spicefile.Po
include ./$(DEPDIR)/spicefile.moc.Po
include ./$(DEPDIR)/subcircuit.Po
include ./$(DEPDIR)/subcirport.Po
include ./$(DEPDIR)/substrate.Po
include ./$(DEPDIR)/switch.Po
include ./$(DEPDIR)/symtrafo.Po
include ./$(DEPDIR)/tff_SR.Po
include ./$(DEPDIR)/thyristor.Po
include ./$(DEPDIR)/tline.Po
include ./$(DEPDIR)/tline_4port.Po
include ./$(DEPDIR)/tr_sim.Po
include ./$(DEPDIR)/transformer.Po
include ./$(DEPDIR)/triac.Po
include ./$(DEPDIR)/tunneldiode.Po
include ./$(DEPDIR)/twistedpair.Po
include ./$(DEPDIR)/vafile.Po
include ./$(DEPDIR)/vccs.Po
include ./$(DEPDIR)/vcvs.Po
include ./$(DEPDIR)/verilogfile.Po
include ./$(DEPDIR)/vexp.Po
include ./$(DEPDIR)/vfile.Po
include ./$(DEPDIR)/vhdlfile.Po
include ./$(DEPDIR)/volt_ac.Po
include ./$(DEPDIR)/volt_dc.Po
include ./$(DEPDIR)/volt_noise.Po
include ./$(DEPDIR)/vprobe.Po
include ./$(DEPDIR)/vpulse.Po
include ./$(DEPDIR)/vrect.Po

.cpp.o:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ $<

.cpp.obj:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(LIBRARIES) $(HEADERS)
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
	clean-noinstLIBRARIES ctags distclean distclean-compile \
	distclean-generic distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
	uninstall-am


.h.moc.cpp:
	$(MOC) -o $@ $<

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
